Using Other Team Functions; Turning Group Call On And Off - Siemens HIPATH 3000 Operating Instructions Manual

Using Other Team Functions

Step by Step
Leave hunt group?
Join hunt grou p?
GA>
or
86
Using Other Team Functions

Turning Group Call On and Off

If this function has been configured (contact System
Support), you b elong to one or more group s of users
who can each be reached under a hunt group or group
call number.
Incoming calls are signaled on all group member tele-
p hones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
b er of the group accepts the call.
You can also belong to a team (including executive/sec-
retary ones) in which station numbers are programmed
on trunk keys
Each member of the group remains available und er his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secret ary team).
If the LED on a programmed "Hunt group join/leave" key
Æ page 55 is illuminated, this means that the audible
tone was activated for at least one group.
You belong to a hunt group or a group call:
Select and confirm.
or
or
FA>
Enter the code for "leave" or "join".
or
Press the Hunt group join/leave key.
or
Æ
page 79.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 91!