Making And Answering Calls; Answering A Call With The Handset; Answering A Call With The Speaker; (Speakerphone Mode) - Siemens HIPATH 3000 Operating Instructions Manual

Step by Step
Release
Speaker

Making and Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone
sequence).
• When you receive an external call, your telephone
rings t wice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a shor t tone (beep) every
six seconds.
The number or the name of the caller appears on the
display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.
C
Lift the handset.
J K
or Raise or lower the volume. Keep pressing the key until
the desired volume is set.
Ending the call:
I
Replace the hand set.
or
Press the key.

Answering a Call with the Speaker

(Speakerphone Mode)

This function is not available with
optiPoint 500 economy and optiPoint 50 0 basic.
The telephone rings. The caller appears on the screen.
Press the key. The LED lights up.
Speakerphone mode.
J K
or Raise or lower the volume. Keep pressing the key until
the desired volume is set.
Making and Answering Calls
13