Testing The Telephone; Testing The Telephone Functions; Checking The Key Assignment - Siemens HIPATH 3000 Operating Instructions Manual

Step by Step
Program/Service
*
940=Pho ne test?
FB=9
Program/Service
*
91=Prog. feature key?
US: An other key?
UK: P rog ram another key?
US: E xit?
UK: E nd?

Testing the Telephone

Testing the Telephone Functions

You can test your telephone functions.
Precondition: Your telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
If everything is OK,
• all LEDs on the telephone start flashing, including
the ones on the key module (only the Program/Ser-
vice menu LED lights up);
• your station number appears on the screen;
• all p ixels in the display are activated;
• the ringer signal sounds.

Checking the Key Assignment

You can check the assignment of keys on your tele-
phone to see which functions are programmed on
which keys.
Press the key. The LED lights up.
Select and confirm.
or
FB:
Enter the code.
Press the key. The key assignment appears on the
screen.
Select and confirm.
or
Select and confirm.
Testing the Telephone
61