Siemens HIPATH 3000 Operating Instructions Manual page 112

FCC and Industry Canada Compliance
If at any time the ownership of Siemens optiPoint 500 telephone is transferred to
someone else (whether independently or as par t of a system), please supp ly this man-
ual to the new owner.
2. REN
The ringer equivalence number (REN) is used to determine the quality of devices which
may be connected to the telephone line. Excessive RENs on the telephone line may
result in the devices not ringing in response to an incoming call. In most, but not all ar-
eas, the sum of RENs should not exceed five (5.0). At the base of the telephone is a
label contains, among other information, the REN and the FCC certification number. If
requested, this information must be given to the telep hone company. To be cert ain of
the number of devices that may be connected to a line, as determined by the tot al
RENs, contact the local telephone company.
Note: REN is associated with the analog telephones. It is not applicable to Siemens op-
tiPoint 500 telephone. If requested, please supply the FCC Cer tification numbers of the
front-end host terminal equipment that have a direct Public Switched Telephone Net-
work connection (i.e. have a REN stated on the lab el) and the highest REN.
3. Facility Interface Information
Siemens optiPoint 500 telep hone connects to the public switched telephone network
through FCC Part 68 certified front-end host PBX equipment which specifies the type
of network jacks to be used.
4. Disruption of the Network
If the Siemens optiPoint 500 telephone disrupts the telephone network, the telephone
company can discontinue your service temporarily. If possible, the telephone company
will notify you in advance. If advance notice is not practical, they will notify you as soon
as possible. You are also informed of your right to file a complaint with the FCC.
5. T elephone Company Facility Changes
The telephone company can make changes in its facilities, equipment, operations, or
procedures that can affect the operation of your equipment. If they do, you should be
notified in advance so you have an opportunity to maintain uninterrupted telephone ser-
vice.
6. Hearing-Aid Comp atibility
T elephones for emergency use and telephones installed in common areas such as lob-
bies, hosp it al rooms, elevators, and hotel rooms must have handsets that are compat-
ible with magnetically coupled hearing aids. Persons who are not in common areas
must also be provided with hearing-aid compatible handsets, if need ed.
The Siemens optiPoint 500 telephone complies with the FCC Rules, Part 68, Section
68.316 Hearing Aid Compatib ilit y and 68.317 volume control requirements.
7 . Programmed Dialer Features
When you program emergency numbers or make test calls to emergency numbers us-
ing Siemens products with programmed d ialer features, stay on the line and briefly ex-
plain to the d ispatcher the reason for the call before hanging up. Perform these activi-
ties in off-peak hours, such as early morning or late evening.