Using Scrub Playback Etc. To Find A Precise Time Location - Korg D1600mkII Owner's Manual

Using marks to move the time location
You can register a specific location in a mark, and then
move instantly to the registered location.
A name can be assigned to each mark, and used to navi-
gate within a song.
Up to 100 marks can be registered in each song.
Registering a mark
1. Move the current time to the location that you wish
to register as a mark.
Use the counter or the [FF]/[REW] keys to change the
current time.
2. Press the [STORE] key to capture the time location.
3. Register the time location you captured.
Press the [MARK] key to register the captured time
location as a mark. The registration will be completed
at the moment you press the key. Marks will be
renumbered in order of time.
Even if you perform steps 2 and following dur-
ing playback or recording, the time location at
the moment you pressed the [STORE] key will be
captured, and can be registered in a mark.
Moving to a mark location
1. Access the [MARK] "Mark" tab page.
2. Use "MarkNumber" to select the desired mark.
3. Press the "Recall" button to recall the mark.
You will move to the time location of that mark.
Deleting a mark
Undo is not available after deleting a mark.
1. Access the [MARK] "Mark" tab page.
2. Use "MarkNumber" to select the mark that you
wish to delete.
3. Press the "Delete" button to access the dialog box.
4. Verify the "mark number to be deleted" in the
upper left. If you wish to delete it, press the "Yes"
button to delete it. If you decide not to delete it,
press the "No" button.
To delete all marks, press the "SelectAll" button to
turn it "On." Then press the "Yes" button to delete
the marks.
Naming a mark
• Press the "Rename" button to access the "Rename-
Mark" dialog box. For the rename procedure, refer to
"2. Naming a song" (→p.35).
• When you have assigned a name, press the "OK" but-
ton.
3. Using scrub playback etc. to
find a precise time location
By using the Scrub function, the Play From/To function,
or the Slow Play function, you can accurately find the
location where an audio region begins, or set a locate
time or mark time with greater precision.
Using the Scrub function
1. Press the [TRACK STATUS] key of the track that
you wish to search, setting its track status to PLAY
(LED lit green).
2. Press the [SCRUB] key to turn the Scrub function
"On" (key lit).
3. Use "TrackSelect" to select the track that you wish
to play.
4. Select "Loc," and rotate the [VALUE] dial to find the
location while listening to the audio.
The audio will play back in correspondence with the
rotation of the [VALUE] dial.
47