Select And Work With The Demo Song; Copy The Demo Song To A New Song Location For Editing; Using The Ff And Rew Keys In A Song - Korg D12 Manuald Tour

Digital recording studio
Hide thumbs Also See for D12:
Table of Contents

Advertisement

KORG D12 Guided Tour
Working with the D12

Select and work with the demo song:

If the demo song "I CAN'T WAIT" isn't already selected, press [SONG/CD] until you select the "SelSong" tab.
1.
Rotate the [DIAL] to select and load the demo song number "I001 I CAN'T WAIT".
2.
Press [PLAY] to begin playback.
3.
Note:
This demo song is protected, as indicated by the "lock" icon to the right of the song name. Following the next section, you'll
learn how to copy this song to a new location so that you can freely-edit it.
As the song plays, work with the FF and REW keys as follows:
4.

Using the FF and REW keys in a song:

To move towards the beginning of the song from a point in the song, while stopped:
Press [REW] repeatedly to move in increments, or hold down [REW] to "rewind" continuously, then release the key to
stop at the new location.
To move towards the beginning of the song during playback:
Press [REW] once to begin rewinding, then press [PLAY] to continue from the new location, or press [STOP] to stop playback.
To move towards the end of the song while stopped:
Press [FF] repeatedly to move in increments, or hold down [FF] to "fast-forward" continuously, then release the key to
stop at the new location.
To move towards the end of the song during playback:
Press [FF] once to begin fast-forwarding, then press [PLAY] to continue from the new location, or press [STOP] to stop playback.
To move to the beginning of the song while stopped:
When you are at a point in the song, Hold down [STOP] and press [REW].
To move to the end of the song while stopped:
When you are at a point in the song, Hold down [STOP] and press [FF].

Copy the demo song to a new song location for editing:

[STOP] song playback, then press [SONG/CD] until you select the "EditSong" tab.
5.
Rotate the [DIAL] to the left, to select "CopySong". The next available empty song location is indicated above the "CDR/RW"
6.
tab.
u to the "Exec." button and press ENTER, then u to the "Yes" button and press
7.
Press
ENTER
again, to return to the "CopySong" page.
8.
Un-protect and rename the copied song:
u to highlight "CopySong", then rotate the [DIAL] to the right, until you select "ProtectSong".
9.
u to the "Exec." button, then press ENTER, so that the "lock" icon disappears in the display.
10.
Press [SONG/CD] until you select the "SelSong" tab, then u to the "Rename" button and press ENTER.
11.
ENTER
14
to copy the song.

Advertisement

Table of Contents
loading

Table of Contents