Step 3: Mixdown; Apply Effects - Korg D1600mkII Owner's Manual

Step 3: Mixdown

"Mixdown" is the process of applying insert effects, master effects, and
EQ etc. to the sound of each track to adjust the overall balance, and
combining everything into two-track stereo data.

1. Apply effects

Here's how to assign an insert effect to a mixer channel so that the effect
is applied to the playback of the track.
[TRACK STATUS] key settings
Specify the tracks that you want to play back.
1. Press the [TRACK STATUS] keys of the playback tracks to select
PLAY (LED lit green).
Make insert effect settings
1. Access the [INSERT EFFECT] "InsAsn" tab page.
2. Press the "
EffectAssign" dialog box.
3. In the dialog box, press the "PlayTrack" radio button, and then press
the "OK" button.
Select the "PlayTrack" radio button when you want to apply the
insert effect to the output of the track channel during mixdown.
4. Press the "
EffectType" dialog box.
5. In the dialog box, select an effect type and press the "OK" button.
For this example, select "1in1out x 4".
"1in1out x 4" means you can use four monaural-in/monaural-out
effects.
Specify the destination of the processed sound
Here's how to apply the insert effect to the recorded vocal.
1. Press the "
Effect AssignChannel" dialog box.
In this dialog box you can specify the track channel to which the
insert effect will be applied.
26
" button at the right of "Assign" to open the "Select
" button below "SelectEffType" to open the "Select
" button below "InsertTo" to open the "Select Insert
Insert Effect
SelectTr