Track Status; Pan; Fader - Korg D1600mkII Owner's Manual

Digital recording studio
Hide thumbs Also See for D1600mkII:
Table of Contents

Advertisement

23. TRACK STATUS

These indicators show the status of each track.
Each time you press the [TRACK STATUS] key, the LED will
change color to indicate the selected function.
• PLAY (LED lit green)
The selected track can be played.
• REC (LED lit red)
The selected track can be recorded.
• INPUT (LED lit orange)
An external audio signal can be sent to the selected
track. This can be done only while stopped.
Select this when you wish to listen to the sound of other
tracks as you play your instrument, or for rehearsing
before you record, or when you wish to mix an external
input with the playback tracks.
• MUTE (LED off)
The selected track will be muted (silent).
The settings available here will depend on the state/set-
tings of the recorder. When stopped, the selection will
change in the order
PLAY→INPUT→REC→MUTE→PLAY. During record-
ing or playback, the selection will alternate between
PLAY↔MUTE or INPUT↔MUTE.
Set the location (pan) at which each channel will be output to
the stereo signal of the master LR bus.
For channels 1–16 whose pair setting is "Off," this is the pan
setting to the masterLR bus.
These settings can be paired and registered in a scene.
When recording to tracks whose channels have a bal-
ance setting, be sure to set the knob at "CNT."
134

24. PAN

25. FADER

Adjusts the volume levels.
The faders that adjust the recording level will differ depend-
ing on whether you are recording an external input or per-
forming bounce recording.
When recording an external input (when "Input" is selected
for the [RECORD] "RecMode" tab page item "Select Rec-
Mode"), the channel faders will adjust the recording level.
When using bounce recording (when "Bounce" is selected
for "SelectRec Mode" in the [RECORD] "RecMode" tab
page), the master fader will adjust the recording level.
[CHANNEL] faders ............................................... [1...16]
These adjust the volume level of each channel.
For a channel whose [TRACK STATUS] is PLAY, the
fader adjusts the playback volume.
For a channel whose [TRACK STATUS] is REC, the fader
adjusts the recording level of the external input or the
rhythm.
For a channel whose [TRACK STATUS] is INPUT, the
fader adjusts the recording level of the external input.
[MASTER] fader ................................................ [MASTER]
This adjusts the volume level of the master LR bus.
The signal from the [MASTER OUT L/R] jacks and [S/P
DIF OUT] jack will be output at the specified volume.
When recording an external input (when "Input" is
selected for the [RECORD] "RecMode" tab page item
"Select RecMode"), this fader adjusts the volume level of
the master bus.
When bounce-recording (when "Bounce" is selected for
"SelectRecMode" of the [RECORD] "RecMode" tab
page), this fader adjusts the recording level on the track
for which the [TRACK STATUS] is set to REC.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents