Tempo/Rhythm; P1 Setup: Tempo And Rhythm Settings - Korg D1600mkII Owner's Manual

3. Pan/fader guide ................. [
These symbols show the difference between the actual
fader or pan locations and the values that are registered
in the scene.
When a scene is recalled, the current position of the fad-
ers may differ from the values registered in the scene. In
this case, selecting the item that you wish to adjust will
cause an indicator symbol to appear, showing the
approximate difference between the internal setting
value and the control.
Faders
: The fader position is more than 51 steps above the
internal value.
: The fader position is between 21–50 steps above the
internal value.
: The fader position is between 1–20 steps above the
internal value.
: The fader position matches the internal value.
: The fader position is between 1–20 steps below the
internal value.
: The fader position is between 21–50 steps below the
internal value.
: The fader position is more than 51 steps below the
internal value.
Pan
: The pan knob is more than 51 steps to the left of the
internal value.
: The pan knob is between 21–50 steps to the left of the
internal value.
: The pan knob is between 1–20 steps to the left of the
internal value.
: The pan knob matches the internal value.
: The pan knob is between 1–20 steps to the right of
the internal value.
: The pan knob is between 21–50 steps to the right of
the internal value.
: The pan knob is more than 51 steps to the right of the
internal value.
4. SceneNumber .......................................... [001...100]
This recalls the mixer settings of a scene to the current
time location.
]

9. TEMPO/RHYTHM

Here you can make tempo, time signature, and rhythm
(metronome) settings for a song. When the counter is dis-
playing "MBT" (measures, beats, and 1/96th of a beat), it
will operate according to the specified tempo.
For details on the counter display, refer to "1. COUNTER"
(→p.91).
You can also check the tempo/rhythm settings in the
[SONG/CD] "SelSong" tab page.

P1 SetUp: Tempo and rhythm settings

1
4
1. TempoSource...........[Manual, TempoMap, TempoTrack]
Specify the tempo source.
Press the " " button, and you can select from a dialog
box.
Manual: The tempo will follow the "Tempo" and "Beat"
settings. It will not be possible to change the tempo, time
signature, and rhythm pattern automatically as the song
progresses.
TempoMap: The tempo, time signature, and rhythm
pattern will change automatically as the song
progresses, as directed by the tempo map. The tempo
map can be created in the "TmpMap" tab page.
TempoTrack: The recorded tap tempo or MIDI Clock
will be used. Use the "TmpTrack" tab page to record a
tap tempo or tempo data from a sequencer, and select
"TempoTrack" here.
The time signature will follow the settings created in the
"TmpMap" tab page. For details, refer to "Tempo map"
(→p.72).
2. Tempo................................................ [40...240, (***)]
Specify the tempo that will be used when "Tempo-
Source" is set to "Manual."
In the case of "TempoMap," this will show the current
tempo created in the "TmpMap" tab page.
In the case of "TempoTrack," this will show "***."
The units are =40–240.
3. Beat................................................. [01/04...16/16]
Specify the time signature that will be used when
"TempoSource" is set to "Manual."
In the cases of "TempoMap" and "TempoTrack," this
will show the time signature corresponding to the
current time as specified in the "TmpMap" tab page.
7
3
6
5 2
115