EXAMPLE OF SETTING
SQD-8 records data of outside MIDI instrument
and controls tempo.
Setting to receive data from outside MIDI
Q 0 -
II. Setting to record and playback data on the
_ _ _ . . . . ! . I . ! :!, N
Q 0 -
Note 1: Don't connect or disconnect MIDI cables
during playing or recording on the SQD-
8 or while playing keyboard of connected
Note 2: When using MIDI keyboard, please take
care not to apply transposition to the
keyboard or to change the tuning. When
using drum-machine, etc., which can
designate the note number with keypad
instead of keyboard, please confirm the
note-number with the manual of the
To playback after recording is finished,
please see "Play" (p. 19).
REAL TIME RECORDING
Please confirm that SQD-8 and outside
MIDI instrument are correctly connected
and the power supply is on.
Push Function Select Keyf}(Down Key) and
set display function mark (
) to REAL
(Real Time Recording-
REAL TIME REC
Choose a track number to be used for
recording using the Track Key.
"REC" flashes on the chosen track
number in the track indication display.
If a mistake is made, push Reset ( M
for cancellation and push another
Only one track, at a time can be
designated for recording.
Setting and changing beat.
1. Push BEAT KEY
2. Move DATA SLIDER
up and down to
confirm or change beat.
. Beat indication will be changed.
. Time signature that can be set by the
SQD-8 are 2/4, 3/4, 4/4, 5/4 and 6/4.
3. Push Beat Key again after confirmation
or change is finished.
Setting or changing beat is not possible
unless MEASURE indication is O.