Debug Sw-Vlan Notification - Cisco Catalyst 3120 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3120 for HP Debug Commands

debug sw-vlan notification

Use the debug sw-vlan notification privileged EXEC command to enable debugging of the activation
and deactivation of Inter-Link Switch (ISL) VLAN IDs. Use the no form of this command to disable
debugging.
Syntax Description accfwdchange
allowedvlancfgchange
fwdchange
linkchange
modechange
pruningcfgchange
statechange
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(40)EX
Usage Guidelines
The undebug sw-vlan notification command is the same as the no debug sw-vlan notification
command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
OL-12248-01
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | pruningcfgchange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |
linkchange | modechange | pruningcfgchange | statechange}
Display debug messages for VLAN manager notification of aggregated
access interface spanning-tree forward changes.
Display debug messages for VLAN manager notification of changes to the
allowed VLAN configuration.
Display debug messages for VLAN manager notification of spanning-tree
forwarding changes.
Display debug messages for VLAN manager notification of interface
link-state changes.
Display debug messages for VLAN manager notification of interface mode
changes.
Display debug messages for VLAN manager notification of changes to the
pruning configuration.
Display debug messages for VLAN manager notification of interface state
changes.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
debug sw-vlan notification
B-83