Show Platform Vlan - Cisco Catalyst 3120 Command Reference Manual

show platform vlan

show platform vlan
Use the show platform vlan privileged EXEC command to display platform-dependent VLAN
information.
Syntax Description misc
mvid
prune
refcount
rpc {receive |
transmit}
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(40)EX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
C-46
show platform vlan {misc | mvid | prune | refcount | rpc {receive | transmit}} [ | {begin | exclude
| include} expression]
Display miscellaneous VLAN module information.
Display the mapped VLAN ID (MVID) allocation information.
Display the stack pruning database. Display the platform-maintained pruning
database.
Display the VLAN lock module-wise reference counts.
Display remote procedure call (RPC) messages. The keywords have these
meanings:
receive—Display received information.
•
transmit—Display sent information.
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Cisco Catalyst Blade Switch 3120 for HP Show Platform Commands
OL-12248-01