Cisco Catalyst 3120 Command Reference Manual page 692

Catalyst blade switch 3120 for hp command reference

Hide thumbs Also See for Catalyst 3120:

Table of Contents

spanning-tree uplinkfast

Do not enable the root guard on interfaces that will be used by the UplinkFast feature. With UplinkFast,

the backup interfaces (in the blocked state) replace the root port in the case of a failure. However, if root

guard is also enabled, all the backup interfaces used by the UplinkFast feature are placed in the

root-inconsistent state (blocked) and prevented from reaching the forwarding state.

If you set the max-update-rate to 0, station-learning frames are not generated, so the spanning-tree

topology converges more slowly after a loss of connectivity.

This example shows how to enable UplinkFast:

Switch(config)# spanning-tree uplinkfast

You can verify your setting by entering the show spanning-tree summary privileged EXEC command.

Related Commands

show spanning-tree

spanning-tree vlan

Cisco Catalyst Blade Switch 3120 for HP Command Reference

Displays a summary of the spanning-tree interface states.

root primary

Forces this switch to be the root switch.

Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands