Cisco Catalyst 3120 Command Reference Manual page 444

show diagnostic
| exclude
| include
expression
Defaults This command has no default setting.
Command Modes User EXEC
Command History Release
12.2(40)EX
Usage Guidelines
The show diagnostic post command output is the same as the show post command output.
If you do not enter the switch number parameter with the content, result, schedule, and switch
keywords, information for all stack members is displayed.
The show diagnostic result switch [number | all] [detail] command output is the same as the show
diagnostic switch [number | all] [detail] command output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This example shows how to display the online diagnostics that are configured on all the switches in a stack:
Switch> show diagnostic content switch all
Switch 1:
Diagnostics test suite attributes:
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) TestPortAsicStackPortLoopback ---> B*N****I** not configured n/a
2) TestPortAsicLoopback ------------> B*D*X**IR* not configured n/a
3) TestPortAsicCam -----------------> B*D*X**IR* not configured n/a
4) TestPortAsicRingLoopback --------> B*D*X**IR* not configured n/a
5) TestMicRingLoopback -------------> B*D*X**IR* not configured n/a
6) TestPortAsicMem -----------------> B*D*X**IR* not configured n/a
This example shows how to display the running tests in a switch stack:
Switch> show diagnostic status
<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-416
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
OL-12248-01