Cisco Catalyst 3120 Command Reference Manual page 178

ip arp inspection filter vlan
Examples
This example shows how to apply the ARP ACL static-hosts to VLAN 1 for dynamic ARP inspection:
Switch(config)# ip arp inspection filter static-hosts vlan 1
You can verify your settings by entering the show ip arp inspection vlan 1 privileged EXEC command.
Related Commands Command
arp access-list
deny (ARP access-list
configuration)
permit (ARP
access-list
configuration)
show arp access-list
show inventory
vlan-range
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-150
Chapter 2
Description
Defines an ARP ACL.
Denies an ARP packet based on matches against the DHCP bindings.
Permits an ARP packet based on matches against the DHCP bindings.
Displays detailed information about ARP access lists.
vlan Displays the configuration and the operating state of dynamic ARP
inspection for the specified VLAN.
Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
OL-12248-01