Chapter 2
Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
If you enter the dot1x control-direction in interface configuration command to enable unidirectional
control, this appears in the show dot1x all command output:
ControlDirection
If you enter the dot1x control-direction in interface configuration command and the port cannot support
this mode due to a configuration conflict, this appears in the show dot1x all command output:
ControlDirection
Related Commands
Command
show dot1x
interface-id]
OL-12248-01
= In
= In (Disabled due to port settings)
Description
[all | interface
Displays control-direction port setting status for the specified
interface.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
dot1x control-direction
2-97