Cisco Catalyst 3120 Command Reference Manual page 266

location (interface configuration)
This example shows how to enter emergency location information for an interface:
Switch(config)# interface gigabitethernet2/0/2
Switch(config-if)# location elin-location-id 1
Switch(config-if)# end
You can verify your settings by entering the show location elin interface privileged EXEC command.
Related Commands Command
location (global configuration)
show location
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-238
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Description
Configures the location information for an endpoint.
Displays the location information for an endpoint.
OL-12248-01