Cisco Catalyst 3120 Command Reference Manual page 543

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Note Though visible in the command-line help strings, the poe keyword is not supported.
Defaults
There is no default.
Command Modes Privileged EXEC
Command History Release
12.2(40)EX
Usage Guidelines When OBFL is enabled, the switch records OBFL data in a continuous file that contains all of the data.
The continuous file is circular. When the continuous file is full, the switch combines the data into a
summary file, which is also known as a historical file. Creating the summary file frees up space in the
continuous file so that the switch can write newer data to it.
When using the module switch-number parameter, if you enter the module keyword but do not enter the
switch number, the switch displays OBFL information about the stack members that support OBFL.
Use the start and end keywords to display data collected only during a particular time period. When
specifying the start and end times, follow these guidelines:
•
•
•
•
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
OL-12248-01
Modification
This command was introduced.
hh:mm:ss—Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the colons (:).
For example, enter 13:32:45.
day—Enter the day of the month. The range is from 1 to 31.
month—Enter the month in upper case or lower case letters. You can enter the full name of the
month, such as January or august, or the first three letters of the month, such as jan or Aug.
year—Enter the year as a 4-digit number, such as 2008. The range is from 1993 to 2035.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
show logging
2-515