Table of Contents
Advertisement
Output
Output Example
show.frus
Syntax
Purpose
Parameters
Command Example
Output
The data is displayed as a table that includes the following
properties:
Ficon MS State
The state of the Ficon MS feature.
Ficon MIHPTO
The Ficon MIHPTO value in seconds.
Ficon MS State:
Ficon MIHPTO (seconds):
frus
This command displays information about all FRUs.
This command has no parameters.
Root> show frus
The FRU information is displayed as a table that includes the
following properties.
FRU
The FRU name. (This may show Unknown or
Not Installed, if the FRU is not installed.)
Position
The relative position of the FRU, that is, its slot.
State
The state of the FRU. Values are:
Active—the current module is active.
Backup—this module is not currently being
used, but it is available for immediate failover.
NotInst—the module is not currently installed.
Failed—the current module is failed.
Serial Num
The serial number of the FRU. (This field is
blank for power supply modules of the
Sphereon 4300 and Sphereon 4500 switches.)
Part Num
The part number of the FRU.
Beacon
The beaconing state of the FRU (On or Off).
Pwr On Hrs
The power-on hours value for the FRU.
Disabled
180
CLI Commands
show
2
2-153
Advertisement
Table of Contents
