McDATA Enterprise Operating System User Manual page 255

Message Error 101: Command Not Supported on This Product
Description This product does not support the requested command.
Action Command not supported. No action necessary.
Message
Error 102: Switch Not Operational
Description The request cannot be completed because the switch is not
operational.
Action Consult the installation/service manual and contact your service
representative.
Message
Error 103: Port Diagnostic In Progress
Description The request cannot be completed because a port diagnostic is
running.
Action Wait for the diagnostic to complete.
Message
Error 104: System Diagnostic In Progress
Description The request cannot be completed because a system diagnostic is
running.
Action Wait for the diagnostic to complete.
Message Error 105: Max Threshold Definitions Reached
Description The maximum number of total threshold alerts has already been
reached.
Action Remove a threshold alert before adding the new threshold alert. A
total of 16 counter and throughput threshold alerts is allowed.
Error Messages
A-15
A