Config.opensysms.sethostctrlstate; Config.opensysms.setstate - McDATA Enterprise Operating System User Manual

config
2

config.openSysMS.setHostCtrlState

Command Example

config.openSysMS.setState

Command Example
Enterprise Operating System Command Line Interface User Manual
2-24
6
...
NOTE: The command
is the same as this command.
Syntax
setHostCtrlState HostContrlState
Purpose This command sets the enabled state of the Open Systems
Management Server Host Control.
Parameters This command has one parameter:
HostContrlState
Root> config openSysMS setHostCtrlState enable
Syntax
setState osmsState
Purpose This command sets the enabled state of the Open Systems
Management Server (OSMS). OSMS is a feature that allows host
control and inband management of the director or switch through a
management application that resides on an open-systems
interconnection (OSI) device.
Parameters This command has one parameter.
osmsState
Root> config openSysMS setState 1
130
show.NPIV.config
This parameter can be set to enable or
disable. Boolean 1 and 0 values may also
be substituted.
Specifies whether the Open Systems
Management Server is enabled. Valid values are
enable and disable. Boolean 1 and 0 may be
substituted as values.
on page 2-159 has functionality that