show.auditLog
Syntax
Purpose
Parameters
Command Example
Output
•
show.features
•
show.security.portbinding
•
show.security.switchbinding
•
show.security.fabricbinding
•
show.openTrunking.config
•
show.thresholdAlerts.alerts
•
show.fabric.topology
•
show.fabric.nodes
•
show.security.switchACL
•
show.ficonCUPZoning
•
show.FencingPolicies
auditLog [clear]
This command displays the entries of the audit log after the last time
the log was cleared.
This command has one optional parameter.
clear
Adding the optional 'clear' parameter
removes all entries from the log. If the log
is full, it will resume collecting log
entries.
show auditLog
The output from this command displays the following data.
Date/Time
The date and time of the log entry.
Action
Type of Audit Log event.
Source
Source of Audit Log event.
User ID
Identifier of the user that made the
command. Usually an IP Address.
show
CLI Commands
2-139
2