Config.switch.zoneflexpars - McDATA Enterprise Operating System User Manual

config
2
Output Example

config.switch.zoneFlexPars

Enterprise Operating System Command Line Interface User Manual
2-80
Zoning RSCN
Limited Fabric
RSCN
Zone Flex Pars
The output from the config.switch.show command displays as
follows.
BB Credit:
R_A_TOV:
E_D_TOV:
Preferred Domain Id: 1
Switch Priority:
Speed:
Rerouting Delay:
Interop Mode:
Insistent Domain Id: Disabled
Domain RSCN:
Zoning RSCN:
Limited Fabric RSCN: Disabled
Zone FlexPars:
Syntax
zoneFlexPars zoneFlexParstate
Purpose This command configures the state of Zone Flex Pars.
When enabled, allows zoning RSCNs to be sent
to registered members of the fabric.
When enabled, fabric RSCNs are suppressed
after an IPL.
When set to fabric, RSCNs will only be sent to
affected fabric members when zoning
information changes. When set to none, filtering
of RSCNs will not take place, and RSCNs will
be sent to all zoneset members when zoning
information changes.
2
20
4
Principal
2 Gb/sec
Enabled
Open Fabric 1.0
Enabled
Disabled
Fabric