Config.security.fabricbinding.showpending; Config.security.portbinding; Config.security.portbinding.bound - McDATA Enterprise Operating System User Manual

config.security.fabricBinding.showPending

Syntax
Purpose
Parameters
Output
Output Example

config.security.portBinding

config.security.portBinding.bound

Syntax
showPending
This command displays the pending FBML, which may not reflect
what is active on the fabric.
This command has no parameters.
The fabric binding configuration data is displayed as a table that
includes the following properties of the Pending FBML.
Domain ID The domain ID of the FBML member. Valid
domain ID's range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment Indicates whether the FBML member is Local,
Status Attached, or Unattached. For more information,
see
page 2-51.
The output from the config.security.fabricBinding.showPending
command displays as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
The Port Binding CLI commands enable you to "bind" a specific
switch or director port to the WWN of an attached node, switch, or
director for exclusive communication.
bound portNumber portBindingState
Fabric Binding Membership Terminology
config
on
CLI Commands
2-57
2