McDATA Enterprise Operating System User Manual page 231

Switch Priority The switch priority as set in the
config.switch.priority command. For more
information, see
page 2-75.
Speed The switch speed as set in the
config.switch.speed command. (This does not
apply to the Sphereon 4300 and Sphereon 4500
switches.) For more information, see
config.switch.speed
Rerouting Delay The rerouting delay as set in the
config.switch.rerouteDelay command. For more
information, see
page 2-77.
Interop Mode The interoperability mode as set in the
config.switch.interopMode command. For more
information, see
page 2-74.
Active Domain The active domain ID of the switch. This ID
Id may or may not be the same as the preferred
domain ID.
World Wide The WWN for the switch.
Name
Insistent Domain Configured Insistent domain ID state as set in
Id the config.switch.insistDomainId command.
For more information, see
config.switch.insistDomainId
Domain RSCN Configured Domain RSCN state as set in the
config.switch.domainRSCN command. For
more information, see
on page 2-72.
Zoning RSCN Configured Zoning RSCN state as set in the
config.switch.zoningRSCN command. For more
information, see
page 2-81.
FC Address The domain ID of the switch derived from the
Domain Id Fibre Channel Address.
Limited Fabric When enabled, fabric RSCNs are suppressed
RSCN after an IPL.
config.switch.priority on
on page 2-78.
config.switch.rerouteDelay
config.switch.interopMode
on page 2-73.
config.switch.domainRSCN
config.switch.zoningRSCN
CLI Commands
show
2
on
on
on
2-187