Config.ficonms.show; Config.ip.ethernet - McDATA Enterprise Operating System User Manual

config
2

config.ficonMS.show

Command Example
Output Example

config.ip.ethernet

Enterprise Operating System Command Line Interface User Manual
2-20
Syntax
show
Purpose This command shows the Ficon MS settings
Parameters This command has no parameters.
Root> config ficonMS show
Output The data is displayed as a table that includes the following
information:
Ficon MS State
Ficon MIHPTO
The output from the config ficonMS show command displays as
follows:
Ficon MS State: Disabled
Ficon MIHPTO (seconds):
Syntax
ethernet ipAddress gatewayAddress subnetMask
Purpose This command sets the Ethernet network settings.
ATTENTION! The Telnet connection can be lost when these Ethernet
network settings are changed.
NOTE: If the IP address is reconfigured, your Telnet client must be
reconnected to the new IP address. A new login will be requested.
The state of the FICON MS feature.
The FICON MIHPTO value in seconds.
180