Perf.thresholdalerts.counter.removeport - McDATA Enterprise Operating System User Manual

perf
2
Command Example

perf.thresholdAlerts.counter.removePort

Enterprise Operating System Command Line Interface User Manual
2-122
Parameters This command has the following parameters.
name
portNumber
Specifying a port type removes all the ports from the alert and applies
the alert to each port that is the specified type of port. Valid values
are:
• eport
• fport
• flport (Sphereon 4300 and Sphereon 4500 only)
NOTE: A counter threshold alert is not allowed to specify both port types
and individual port numbers.
Root> perf thresholdAlerts counter addPort checklinks 12
Syntax
removePort name portNumber
Purpose This command removes a port from the specified counter threshold
alert.
The name of a counter threshold alert as
defined by the command
perf.thresholdAlerts.counter.addAlert
page 2-120.
Specifies the port number or port type. Valid
port number values:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
all applies the counter threshold alert to every
port on the product.
on