Config.zoning.clearzone; Config.zoning.clearzoneset - McDATA Enterprise Operating System User Manual

config
2
Command Example

config.zoning.clearZone

Command Example

config.zoning.clearZoneSet

Command Example
Enterprise Operating System Command Line Interface User Manual
2-88
Parameters This command has one parameter.
zoneName
Root> config zoning addZone TheUltimateZone
Syntax
clearZone zoneName
Purpose This command clears all zone members for the specified zone in the
work area. This command does not change the zone name.
Parameters
This command has one parameter.
zoneName
Root> config zoning clearZone TheNotUltimateAtAllZone
Syntax
clearZoneSet
Purpose This command clears the zone set contained in the work area,
removing all zones, and takes effect immediately. This command
does not change the zone set name.
Parameters This command has no parameters.
Root> config zoning clearZoneSet
Specifies the name of the new zone. The
zoneName must contain 1–64 characters. Valid
characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdef
ghijklmnopqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character
must be alphabetical.
Specifies the name of the zone to be cleared.