The Problem Solver
Professionol
Duol Fuel Ronge
PROBLEM
POSSIBLE CAUSE
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
BURNER CONTROL
KNOB WILL NOT
TURN
, Electrical plug is not plugged into a live power outlet.
, Gas not turned on.
, Burner parts not replaced correctly.
, Holes in the simmer rings or slits in the burner rings (]re clogged.
, Clogged orifice, or wet burners or electrodes.
, Burner p(]rts not repl(]ced correctly.
A. Yellow flomes: Coil for
service.
B. Yellow tips on outer
cones:
Normol
for LP gos.
C. Soft blue flemes:
Normol for noturol gos.
. If burner fl(]mes look like {A},c(]ll for service. Norm(]l burner fl(]mes
should look like {B} or {C},depending on the type of g(]s.
* The r(]nge m(]y be connected to the wrong fuel type. Cont(]ct the
person who inst(]lled your r(]nge or m(]de the conversion.
When the knob is (]t the OFF position, it must be pushed in before
it c(]n be turned, (]nd it c(]n only be turned in (] counterclockwise
direction. When the knob is (]t (]ny other position, it c(]n be turned
in either direction without being pushed inw(]rds.
40
Need help?
Do you have a question about the monogram ZDP304LP6SS and is the answer not in the manual?