GE Monogram ZDP30N4DSS Dimensions And Specifications

™
Monogram.
ZDP30N4DSS - GE Monogram
Dimensions and Specifications (in inches)
ZX22B30YSS
ZX12B30YSS
ZX1B30YSS
35-1/4"-36-3/4"
26-3/4"
Specification Created 7/01
™ 30" Free-Standing Professional Gas Range
21-1/4"
12"
1-1/2"
29-7/8"
These ranges are factory set for either natural gas or
liquid propane gas.
30" Natural Gas Model:
ZDP30N4YSS–4 gas burners
30" Liquid Propane Gas Model:
ZDP30L4YSS–4 gas burners
Accessory Requirements:
All models require the installation of a backguard. A
backguard should be ordered at the same time as the
range. Both must be on site at the time of installation.
Order one backguard for 30" models:
ZX1B30YSS–1-1/2" high backguard
(required for island installations)
ZX12B30YSS–9" high backguard
ZX22B30YSS–22" high backguard with warming rack
(2 piece)
Advance Planning:
Refer to dimensional drawings for appropriate placement
and necessary clearances when planning
the installation.
• Cabinetry cannot be installed directly above the range.
• This range requires the installation of a vent hood,
30" to 36" above the surface.
– The vent hood must be at least 24" deep.
– The vent hood must be the same width as the range.
– The vent hood must provide at least 600 CFM and
up to 800 CFM.
• Working areas adjacent to the range should have
18" minimum clearance between countertop and
cabinet bottom.
• Clearance between range and side wall or combustible
material must be at least 12" on each side.
For answers to your Monogram,
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center ® service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
® GE Profile ™ or