Applying Reverb - Roland VR-6HD Reference Manual

Applying Reverb

Adds reverberation to the sound.
Adjusting how much reverb to send
Parameter Explanation
REVERB SEND Adjusts the amount of audio sent to reverb.
Adjusting how much reverb is returned
* On the audio output setup screen, adjust how much reverb is
returned.
Ó
1 .
[MENU] button "AUDIO"
BUS", and press the [VALUE] knob.
The setup screen appears.
2 .
Press the AUDIO EFFECT [REVERB] button to turn on (lit).
REVERB
Reverb turns on.
3 .
Touch the screen to access the settings.
Parameter Explanation
Specifies the amount of sound that is returned from
LEVEL
the reverb (return level). This adjusts the depth of the
overall reverb.
Specifies the reverb type.
ROOM:
Produces the natural-sounding
TYPE
reverberation of a room.
HALL: Produces the reverberation that is typical of
a performance in a concert hall.
Specifies the size of the room. The larger the value, the
SIZE
longer the reverb time.
REVERB
RETURN Adjusts the return level of the reverb.
LEVEL
4 .
Press the lit [SETUP] button to close the setup screen.
Ó Ó
"OUTPUT" select "MAIN
Audio Operations
47