Before using this unit, carefully read the sections entitled "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (leaflet "USING THE UNIT SAFELY" and Owner's Manual (p. 12)).
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every
feature of your new unit, read Owner's Manual in its entirety. This manual should be saved and kept on hand as a convenient reference.
If you are connecting a * This instrument is equipped with balanced (XLR) type jacks. TIP: guitar, turn the HS-5 on its back and turn on the Wiring diagrams for these jacks are shown below. Make 2: HOT...
Using the HS-5 Making Connections Connect the HS-5, the AC adaptor, mics, guitars, and other devices as shown in the connection examples. Section E Section D Turning the Power On/Off Connecting Your Equipment To PA 1 Connect the included AC adaptor to the The jacks and settings depend on the DC IN jack.
* If you don’t want to apply an effect, [MAIN MIX] adjust the volume of the choose “LINE. ” [INPUT] button headphones. button * The HS-5 is capable of producing high-volume output. Adjust the volume with care to avoid damaging your hearing &p. 5 &p. 6...
AMP CLEAN Clean sound suitable for bass. BASS The HS-5 provides several amp simulators or effects for guitar, bass, and vocal. Crunch sound with a natural distortion, suitable for bass. CRUNCH You can switch the effect as appropriate for your performance.
To adjust the headphone output, use the [PHONE] knob and [MY MIX] knob of each section. The HS-5 can sound a click tone while you perform. The volume of the click tone can be adjusted individually for each section. By default, the tempo is set to 120 BPM.
Switching the Reverb Type and Editing the Parameters The HS-5 lets you change the type of reverb and how it sounds. Each section of the HS-5 provides reverb to add reverberation to your vocal or performance, as well as effects for guitar, bass, and vocal.
Here’s how to play back a performance that you recorded on a USB flash drive, to listen to it or practice The HS-5 can record your performance on a USB flash drive connected to the MEMORY port. along with it.
Sound adjusted by each section Sound adjusted by main mixer The HS-5 has a main mixer and four sub-mixers (MIX A–D). The sub-mixers are independent of the main mixer; each performer can individually adjust their own sub-mixer for more comfortable performing.
Press the button to save/overwrite-save the settings. When the button stops blinking, the settings have been saved. The HS-5 then returns to its normal state. * If you decide to return to the normal state without saving/overwrite-saving, press the button.
A–E as individual tracks (multi-track recording), or to record the mixed sound of sections A–E (MAIN MIX). In addition to recording, you can also use the HS-5 to hear stereo songs or audio that’s played back from your computer.
When using the unit with a stand recommended You can reset the HS-5 to its factory-set condition by turning the by Roland, the stand must be carefully placed so Handle the ground terminal carefully • Carefully insert the USB flash drives all the way in—until it is firmly...
DECLARATION OF CONFORMITY Compliance Information Statement Model Name : HS-5 Type of Equipment : AUDIO MIXER Responsible Party : Roland Corporation U.S. Address : 5100 S. Eastern Avenue Los Angeles, CA 90040-2938 Telephone : (323) 890-3700 For the USA FEDERAL COMMUNICATIONS COMMISSION...
Need help?
Do you have a question about the HS-5 and is the answer not in the manual?
Questions and answers