Rear Panel - Roland M-5000 Quick Start Manual

Part Names and Functions

Rear Panel

2 3
17 18 19 20
1
LAMP Connectors
These are XLR-4-31 connectors that supply power to third-party
gooseneck lamps.
NC GND
2 3
NC DC+12V
1
4
2
POWER Switch
This turns the power on and off.
0"Turning the Power On and Off" (p. 20)
NOTE
If you need to turn off the power completely, first turn off the
unit, then unplug the power cord from the power outlet. Refer to
"To completely turn off power to the unit, pull out the plug
from the outlet" (p. 4).
3
FOOT SW 1/2 Jacks
These are TRS standard jacks for connecting footswitch pedals.
36
1
8
4 5 6 7
7
21 22
[DC+12V/500mA]
8 10 12
11
9 13 14
23
4
GP I/O Connector
This is a D-sub 25-pin connector (4 in/12 out) for sending and
receiving control signals to and from an external device.
13
25
Connector No. Type
1 GPO 1
2 GPO 3
3 GPO 5
4 GPO 7
5 GND
6 GND
7 GND
8 GND
9 +5V
10 GPI 2
11 GPI 4
12 GPO 10
13 GPO 12
14 GPO 2
15 GPO 4
16 GPO 6
17 GPO 8
18 GND
19 GND
20 GND
21 +5V
22 GPI 1
23 GPI 3
24 GPO 9
25 GPO 11
Input pin [Voltage detection range: 0-5V , Max +5V]
Output pin [Open collector , Vmax=12V , Imax/pin=75 mA]
DC output [DC+5V / 1000mA]
1
15 16
24
1
14