Table of Contents
Advertisement
3. Rear Panel
a
PHANTOM
3. fuopaaans:
A
©
©
©) bd
6 )) 5
Zz
0
re
LOS ae ae
}|
_
@input Connectors
These
are
XLR(balance)
type
input
connectors.
Connect microphones, musical instruments, etc. When
both Input Socket and Connector are used at the same
time for one channel, the Input Socket has priority.
@Phantom Switches
These are the power supply switches
for condenser
microphones
that
require
external
power
supply.
When you do not use a condenser microphone, be sure
to set the relevant switch to the OFF position.
When
these are set to the ON positions. the Input
Connector
"1" (ground), "2"(cold) and "3" (hot) carry
on 48VDC,
When connecting or disconnecting a microphone cable,
be sure to set the switch to the OFF position.
* Channels 9 to 16 carry 48VDC on the Input Sockets. if
you
happen
to connect
to standard
phone sockets by
mistake
without
the
Phantom
Switch
set to OFF,
damage
may
be caused
to devices.
Be especially
careful
while
you
have
the
"Fhantom
Switch's
Cover" (4: off.
@input Sockets
Connect microphones. electronic musica] instruments.
etc, to these sockets.
Use stereo standard plugs for balance input.
12
%* Use standard phone plugs for unbalanced input.
*When
connecting
condenser
microphones
to
the
Channels 9 to 16 that require phantom power supply,
use
the
input
cable
(PCS-30).
Then
remove
the
Phantom
Switch's
Cover,
and
set
ON
only
the
switches
for
the
channels
that
use
the
phantom
power.
CANNON XLR-3-11C
Advertisement
Table of Contents
