Previous view
6
MEMORY/CALL OPERATION
■ Selecting a memory channel
D Using [Y] or [Z]
q Push [VFO/MR/CALL] several times to select the
memory mode.
• "X" appears.
w Push [Y] or [Z] to select the desired channel.
• Only programmed channels are displayed.
D Using the keypad
q Push [VFO/MR/CALL] several times to select the
memory mode.
• "X" appears.
w To select the desired channel, enter the 3 digits of
the channel number using the keypad.
• Blank channels are also selectable.
• Entering one or two digits, and then pushing [# ENT] also
selects a 1 or 2 digit memory channel, respectively.
■ Selecting the Call channel
➥ Push [VFO/MR/CALL] several times to select the
Call channel mode.
• "C" appears instead of the memory channel number.
[i.e.]: Selecting memory channel "14."
Push
.
Appears
Push
,
and
The memory channel
is selected.
Push
several times to select the Call channel mode.
Appears
22
sequentially.