Transmitting A Dtmf Code Sequence - Icom IC-V80 Instruction Manual

Previous view
9
DTMF MEMORY
■ Transmitting a DTMF code
The transceiver has three methods of transmitting a
DTMF code sequence. Select the desired option in the
Set mode.
D Selecting the DTMF code transmission option
q Push [FUNC](M), and then push [SET](8) to enter the
Set mode.
w Push [Y] or [Z] to select the DTMF TX key item
(dmt).
e Rotate [VOL] to select the desired option.
• "dmt.k" : Manual transmission
Transmits the appropriate DTMF code as-
signed to the key.
• "dmt.m" : Using DTMF memory
Transmits the programmed DTMF code se-
quence in the DTMF memory channel assigned
to the key.
• "dmt.t" : Only 1750 Hz tone burst
No DTMF code can be transmitted.
However, while holding down [PTT], pushing ei-
ther [Y] or [Z] transmits the 1750 Hz tone burst.
r Push [# ENT] to exit the Set mode.
D Manual DTMF code transmission
First, set the DTMF TX key to "dmt.k" in the Set mode.
➥ While holding down [PTT], push the desired keys to
manually transmit a DTMF code sequence.
D Using a DTMF memory channel
First, set the DTMF TX key to "dmt.m" in the Set mode.
➥ While holding down [PTT], push the desired DTMF
channel number.
• The "DTMF TX key" item in the Set mode
Manual transmission
Using DTMF memory
Only 1750 Hz tone burst
• DTMF code assignment
Numeric input
" (E)"
• DTMF memory channel number assignment
"d0" to "d9"
"dE"
34
"A"
"B"
"C"
"D"
"# (F)"
"dA"
"dB"
"dC"
"dD"
"dF"