Scan Operation; Scan Types; Band Edge To Band Edge Scan (Full Scan) - Icom IC-V80 Instruction Manual

Previous view
7

SCAN OPERATION

■ Scan types

A scan automatically searches for signals, and makes it easier to locate new stations for contact or listening pur-
poses.

BAND EDGE TO BAND EDGE SCAN (FULL SCAN)

Band
edge
Scan
Jump
MEMORY (SKIP) SCAN (p. 28)
Mch 1 Mch 2 Mch 3
SKIP
Mch 0
Mch 199 Mch 10 Mch 9
■ Band edge to band edge scan
(Full scan)
The band edge to band edge scan repeatedly scans
through the operating band.
q Push [VFO/MR/CALL] several times to select the
VFO mode.
w Push [FUNC](M), and then push [SCAN](5) to start
the scan.
e During the scan, push [FUNC](M), and then push
[SET](8) several times to select "AL" (
, if necessary.
band edge scan)
• To change the scan direction, push [Y] or [Z].
r To cancel the scan, push any key except [ ], [Y]/
[Z], [MONI] or [FUNC](M).
Band
edge
Mch 4 Mch 5
Mch 6
SKIP
Mch 8 Mch 7
band edge to
26
PROGRAMMED SCAN (p. 27)
1A
Band
Scan edges
2A
edge
3A
The Programmed scan P1 scans between 1A and 1b,
P2 scans between 2A and 2b, and P3 scans between
3A and 3b frequencies.
PRIORITY WATCH (p. 29)
• Memory/Call channel watch • Memory scan watch
5 seconds
Memory
VFO
(Call)
frequency
channel
[i.e.]: Starting the band edge to band edge scan.
Push several times.
Push , and then push
If necessary, push , and then push
to select the scan type "AL."
1b
Band
2b
edge
3b
Scan
Jump
5 seconds
Mch 0
Mch 1
SKIP
VFO
Mch 2
frequency
Mch 199
(VFO mode)
.
(A scan starts)
several times