Battery Chargers - Icom IC-V80 Instruction Manual

Previous view
3
BATTERY CHARGING

■ Battery chargers

D Using the BC-191 to rapid charge the BP-264
The BC-191 provides rapid charging of only the BP-264
Ni-MH battery pack. Never use it to charge any other
battery pack.
Charging time: Approximately 2 hours
The following item is additionally required:
• An AC adapter (not supplied with some versions) or the
OPC-515L or CP-23L DC power cable.
D Using the BC-192 to regular charge the BP-264
The BC-192 provides regular charging of only the BP-
264 Ni-MH battery pack. Never use it to charge any
other battery pack.
Charging time (with the BC-147S): Approximately
16 hours
The following item is additionally required:
• An AC adapter (not supplied with some versions) or the
OPC-515L DC power cable.
AC adapter
(A different type, or no AC
adapter is supplied, de-
pending on the version.)
The optional OPC-515L
(for DC power source)
or CP-23L (for 12 V
cigarette lighter socket)
can be used instead of
the AC adapter.
AC adapter
(A different type, or no AC
adapter is supplied, de-
pending on the version.)
The optional OPC-515L
(for DC power source)
can be used instead of
the AC adapter.
Charging time period differs depending
on the input voltage.
12 V : Approximately 36 hours
13.8 V : Approximately 21 hours
16 V : Approximately 16 hours
7
Battery pack Transceiver
Turn OFF power
Screws*
(Self tapping screw:
M3.5 × at least 30 mm)
*Purchase separately.
Using screws
recommended
secure the charger.
Charge indicator
• Lights orange : While charging
• Lights green : Charging is completed.
Battery pack Transceiver
Turn OFF power
Screws*
(Self tapping screw:
M3.5 × at least 30 mm)
*Purchase separately.
Using screws
recommended
secure the charger.
Charge indicator
• Lights green while charging.
NOTE:
The charge indicator will not
go out even after a battery
pack is fully charged.
is
to
is
to