Basic Operation - Icom IC-W32A Instruction Manual

4

BASIC OPERATION

D Beep tones on/off
The confirmation beep tones, which sound each time a switch
is pushed, can be turned ON or OFF, as desired.
Initial set mode
USING
SETTING THE CONFIRMATION BEEP ON/OFF
Confirmation beep is ON.
q Turn power ON while pushing [
set mode.
w Push [
(H/L)(SET)
appears as shown above.
e Rotate [DIAL] to turn the confirmation beep ON or OFF.
r Turn power OFF to exit initial set mode.
18
Confirmation beep is OFF.
SET] to enter initial
(H/L)
J] or [ K] several times until "BE"
(TONE)
D Crossband full duplex operation
The crossband full duplex function can be turned ON or OFF
in initial set mode. When the function is OFF, the sub band
audio is muted during transmission.
Initial set mode
USING
SELECTING CROSSBAND FULL DUPLEX OR
SEMI-DUPLEX
Crossband full duplex
is ON.
q Turn power ON while pushing [
set mode.
w Push [
J] or [
(H/L)(SET) (TONE)
appears as shown above.
e Rotate [DIAL] to select semi-duplex or full duplex.
r Turn power OFF to exit initial set mode.
Crossband full duplex
is OFF. (semi duplex)
SET] to enter initial
(H/L)
K] several times until "CB"