Download Print this page

Grizzly G0709 Owner's Manual: Introduction; Machine Description; Contact Info; Manual Accuracy

14" x 40" gunsmithing lathe.
Hide thumbs

Advertisement

Machine Description

the purpose of a metal lathe is to face, turn, knurl,
thread, bore, or cut tapers in a metal workpiece
with perfect accuracy.
during typical operations, the lathe spindle rotates
the workpiece at various speeds against a fixed
cutting tool that is positioned at a particular angle
for the desired type of cut.
the cutting tool is mounted on a tool post, which
is positioned by three different slides that each
move in different directions.
opposite of the headstock and spindle is a sup-
port device called a tailstock. the tailstock can
be slid along the lathe bed and locked in place to
firmly support the end of a workpiece.

contact Info

We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
-2-

INTRODUcTION

Manual Accuracy

We are proud to provide a high-quality owner's
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
contained inside. sometimes we make mistakes,
but our policy of continuous improvement also
means that sometimes the machine you receive
will be slightly different than what is shown in
the manual.
if you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure, check our website
for an updated version. We post current manuals
and manual updates for free on our website at
www.grizzly.com.
Alternatively, you can call our technical support
for help. Before calling, please write down the
Manufacture Date and Serial Number stamped
into the machine id label (see below). this infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture date
serial number
Model G0709 (Mfg. Since 5/11)

Advertisement

   Also See for Grizzly G0709

   Related Manuals for Grizzly G0709

Comments to this Manuals

Symbols: 0
Latest comments: