Download Print this page

Grizzly G0709 Owner's Manual: Section 1: Safety; Safety Instructions For Machinery

14" x 40" gunsmithing lathe.
Hide thumbs



for your Own Safety, Read Instruction
Manual before Operating This Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of impor-
tance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures. Always use common sense and good judgment.

Safety Instructions for Machinery

OWNER'S MANUAL. read and understand this
owner's manual BeFore using machine.
TRAINED OpERATORS ONLy. untrained oper-
ators have a higher risk of being hurt or killed.
only allow trained/supervised people to use this
machine. When machine is not being used, dis-
connect power, remove switch keys, or lock-out
machine to prevent unauthorized use—especially
around children. Make workshop kid proof!
machinery in areas that are wet, cluttered, or have
poor lighting. operating machinery in these areas
greatly increases the risk of accidents and injury.
alertness is required for safe operation of machin-
ery. never operate under the influence of drugs or
alcohol, when tired, or when distracted.
Model G0709 (Mfg. Since 5/11)
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
cOULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAy result in minor or moderate injury. It may also be used to alert
against unsafe practices.
This symbol is used to alert the user to useful information about
proper operation of the machine.
can be shocked, burned, or killed by touching live
electrical components or improperly grounded
machinery. to reduce this risk, only allow qualified
service personnel to do electrical installation or
repair work, and always disconnect power before
accessing or exposing electrical equipment.
DIScONNEcT pOWER fIRST. Always discon-
nect machine from power supply BeFore making
adjustments, changing tooling, or servicing machine.
this prevents an injury risk from unintended startup
or contact with live electrical components.
EyE pROTEcTION. Always wear Ansi-approved
safety glasses or a face shield when operating or
observing machinery to reduce the risk of eye
injury or blindness from flying particles. everyday
eyeglasses are not approved safety glasses.


   Also See for Grizzly G0709

   Related Manuals for Grizzly G0709

Comments to this Manuals

Symbols: 0
Latest comments: