Grizzly G0709 Owner's Manual: Spindle Motor 110v & 220v Connection

14" x 40" gunsmithing lathe.
Hide thumbs
Spindle Motor 110v & 220v connection
Main Motor
220V
Connection
Z2
To
d
page
76
Ground
Optional
110V
Connection
To
d
page
76
Ground
READ ELECTRICAL SAFETY
-78-
Start Capacitor
150M 250V
U2
Z1
U1
Run Capacitor
20M 400V
Start Capacitor
150M 250V
Z2
U2
Z1
U1
Run Capacitor
20M 400V
ON PAGE 74!
MOTOR DIRECTION
220V
If the lathe chuck rotates in the
opposite direction of what the
spindle ON/OFF lever indicates,
disconnect the lathe from power. At
the motor junction box, swap the
positions of the wires marked U
U
. This will match the motor and
2
spindle rotation to what is indicated
at the spindle ON/OFF lever.
MOTOR DIRECTION
110V
If the lathe chuck rotates in the
opposite direction of what the
spindle ON/OFF lever indicates,
disconnect the lathe from power. At
the motor junction box, swap the
positions of the wires marked Z
Z
. This will match the motor and
2
spindle rotation to what is indicated
at the spindle ON/OFF lever.
Model G0709 (Mfg. Since 5/11)
and
1
and
1

Advertising

   Also See for Grizzly G0709

   Related Manuals for Grizzly G0709

   Related Content for Grizzly G0709

Comments to this Manuals

Symbols: 0
Latest comments: