Introduction; Intended Audience; Related Materials - Qlogic SANbox 5200 Series User Manual

This manual describes the switch management tools which include the SANsurfer
Switch Manager application (version 5.00) and the Command Line Interface (CLI)
for the SANbox 5200 Series Fibre Channel switches (firmware version 5.0). The
SANbox 5200 Series switches are 20 port non-blocking Fibre Channel switches.
This manual defines the features, components, and performance characteristics
of the SANbox 5200 Series switches. The SANsurfer Switch Manager application
is the primary focus of this manual which is organized as follows:
A glossary of terms and an index are also provided.
1.1

Intended Audience

This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
1.2

Related Materials

Refer to the following manuals for information about switch hardware and
installation.
59056-03 C

Introduction

Section 1 describes the intended audience for this manual, related
materials, and technical support.
Section 2 describes how to use SANsurfer Switch Manager, its menus, and
its displays.
Section 3 describes fabric management tasks.
Section 4 describes switch management tasks.
Section 5 describes port and device management tasks.
Appendix A describes the command line interface.
SANbox 5200 Series Fibre Channel Switch Installation Guide, publication
number 59055-03.
Section 1
1-1