Xerox 6200B - Phaser Color Laser Printer Service Manual page 340

3
1. HCF Feeder Circuit Board:
based on communication with the Engine Control Board and information from the
sensors and switches.
Major Functions:
Communicates with the Engine Control Board.
I
Receives information transmitted from the sensors and switches.
I
Controls the Feeder Drive Assembly.
I
Controls the paper pick process.
I
Distributes the DC voltage power supplied from the print engine to each
I
component.
2. Feeder Drive Assembly:
3. Low Paper Sensor:
When the actuator lowers to a pre-determined postion, it blocks the sensor beam to
trigger a low paper status. The actuator position can be seen from the front of the
HCF allowing confirmation of the print media quantity.
322
3
Controls the paper pick-up operation of each tray
Supplies the drive to the tray 2 and 3.
The actuator lowers as print media is used in the tray.
Phaser 6200 Color Laser Printer - Service Manual
1
2
S6200-062