Network Problems
The Phaser 6200 printer maintains 4 logs in memory detailing network functions. The
logs contain TCP/IP, NetWare and AppleTalk initialization events. The logs can also
be accessed remotely via CentreWare.
The logs list events chronologically. The log is limited in length; when the log is full
the printer stops recording data to the log. The logs are stored on the Hard Drive so
only new data is stored each time the printer's power is cycled.
There is a Connection Setup Page, Configuration Page and a network reset available
for troubleshooting Network problems.
To print an Event Log, Runtime Log or Configuration Page:
1.
Enter normal 'Customer Mode'.
2.
From the main menu, highlight Support Menu and press OK.
3.
Scroll and highlight Network Questions? and press OK.
4.
Highlight the appropriate menu item from the list and select OK.
5.
The page should now print.
Troubleshooting
93