RRP 10.2 Toner Cartridge Holder Assembly
(Y) (PL 10.1.1)
(M) (PL 10.1.2)
(C) (PL 10.1.3
(K) (PL 10.1.4)
Removal
2.
Remove the Left and Right Covers (RRP 1.6).
3.
Remove the Holder Toner Cartridge Assembly Unit (RRP 10.1).
Note:
Reinstall the toner cartridges to prevent spillage.
Note:
The holders need to be removed in Y, M, C, K order. There
are small locking tabs between the holders on each end that
lock them together.
4.
In the Holder Toner Assembly Unit, release the tab securing the auger tube from
the Plate Dispensor (PL 10.1.9) with a small screwdriver and remove by sliding to
the right.
Note:
You will need to disconnect the all connectors before
removing the holder in the next steps.
206
Phaser 6200 Color Laser Printer - Service Manual
S6200-149