5.
Disconnect the following Plug/Jacks from each dispenser (item #6):
Y - P/J511, P/J441 and P/J431
I
M - P/J512, P/J442 and P/J432
I
C - P/J513, P/J443 and P/J433
I
K - P/J514, P/J444 and P/J434
I
6.
Near the toner low sensor shift the harness's from the tabs on the Toner Cartridge
Holder Assembly (item #7).
7.
Release the tab securing the Toner Cartridge Holder Assembly (Y, M, C, K) to the
Plate Dispenser (item #8) and slide the Toner Cartridge Holder to the right to
remove.
8
FRU Disassembly - Removal and Replacement Procedures
6
7
S6200-150
207