Removal
1.
Remove the Paper Feeder Assembly Unit from the printer chassis (RRP 3.2).
2.
Disconnect P/J471 (yellow) from the Paper Size Switch in the Paper Feeder Unit
Assembly.
3.
Carefully free the wires (yellow/blue) from their guides, noting the postion of the
wires for reassembly.
4.
Remove the 2 screws securing the Paper Pick Assembly from the Paper Feeder
Unit Assembly.
5.
Raise the Paper Pick Assembly out of the Paper Feeder Unit Assembly.
FRU Disassembly - Removal and Replacement Procedures
145