Xerox 6200B - Phaser Color Laser Printer Service Manual page 267

Removal
1. Remove the Right and Left Tray Guide Assemblies (RRP 14.8) and (RRP 14.9).
2.
Remove the Link Actuator (RRP 14.10).
3. Remove the 2 screws securing the Paper Pick Assembly to the right side of the
HCF frame.
4.
Release 2 tabs on the Paper Pick Assembly from the 2 slits and window on the left
side of the HCF frame.
5. Disconnect P/J824, P/J8220 and P/J825.
6.
Remove the Paper Pick Assembly through the window.
Note: When removing or replacing the the screws, be careful not to
damage the Gear or Spring with the screwdriver. When
passing the Paper Pick Assembly through the window, be
careful not to damage the rubber parts.
FRU Disassembly - Removal and Replacement Procedures 249