Xerox 6200B - Phaser Color Laser Printer Service Manual page 195

Removing the Duplex Actuator
1. Remove the Front Left Cover (RRP 1.11).
2.
Release the 2 tabs securing the Actuator Cover, push in and remove the cover.
3. Release the tab on the left side of the Duplex Actuator.
4. Push the actuator to the left and remove out the right side removing the actuator
with the spring still on the shaft.
Note: Note the position of the actuator spring during removal to
ensure proper reassembly.
Reassembly
Removing the Duplex Sensor
1.
Remove the Duplex Actuator.
2. Release the 3 tabs securing the Duplex Sensor and remove the sensor.
3. Disconnect the connector to the Duplex Sensor.
FRU Disassembly - Removal and Replacement Procedures
S6200-121
177